The 10 Benefits of LED Light

the-10-benefits-of-led-lightLED (light-emitting diode) lights are definitely coming in vogue and taking the place of incandescents. Why? Compared to incandescent bulbs, LED lights are more versatile in that they come in an array of colors and brightnesses. LED lights are also more cost-efficient and seen as a more environmentally-conscious choice.

Energy Saving 

LED lights are said to last 25 times longer than traditional, incandescent bulbs. In fact, LED lights only use one-fourth the energy of incandescents, according to the US Department of Energy. LED lights also avoid leaching any energy from your power supply when not in use.

Versatility of Use 

Mainly due to the cost-efficiency and ease of use of applying LED lights in residential and commercial applications, LED lights can be used for ambient lighting around your garden, garage, place of work, kitchen or bedroom. LED lights are so versatile, in part, because they are directional and come in a variety of luminosities. A hanging light in the kitchen outfitted with a cooler, mellow LED definitely works!

Budget-Friendly Mood Lighting 

LED lights can be purchased in a string of hundreds of tiny LED lights that go great in the den or bedroom. The tininess of these LED lights belies their strength – these lights can literally last a generation or more and many are guaranteed by the manufacturer for five years or more. Just plug the string of LED lights into a standard wall outlet and enjoy mellow, warm lighting.

Immediate Results 

Especially compared to CFL lights, which can take some time to get going, the full brightness of an LED light is seen within seconds of flipping the switch. LED lights also remain cool even after hours of use. This is why LED lights go great on walls or otherwise unaccommodating places – there’s never any serious risk of overheating or quick burnouts.

Choose a Color, Any Color 

Incandescents are in some ways one trick ponies – you know you’re bound for a one-dimensional, yellow hue when you ring up an incandescent. LED lights, on the other hand, come in a variety of color temperatures. If you want a cooler color temperature (say, blue) for the den, then LED lights can make that happen. If you want a warmer LED light (say, a shiny white) to string across the bathroom walls, then that’s also possible with LEDs.

Constant Over Time 

You can think of a regular lightbulb as a battery that wanes in its output over time. LED lights, though, give you the same light over their entire lifetime, which can be 10 years or more depending on whether the LED is EnergyStar-certified. It’s really a no-brainer – if you’re looking for a constant light source tailored to your color and size specifications, then LED lights are the way to go.

Find the laminate flooring that “clicks” with you

One of the best ways to totally change the layout of a room is to change the floor. Laminate flooring allows you to make an elegant improvement to your abode without breaking the bank. But once you’ve chosen laminate flooring, you have many more choices to make. This guide gives you all the specifics that will help you tailor your decision for the best laminate flooring for your home.

First, you should understand what laminate flooring is. Laminate flooring usually has four layers. The back layer may provide water-resistance, as well the solid support for the floor. The core layer is made of a fiberboard to add strength and stability. The third layer is decorative. This is where the image you have chosen is laid. The last layer is the wear or surface layer, the one you will be able to feel. Additionally, if you choose, many brands offer noise-dampening materials that will reduce sound spreading from room to room.

Since you are considering how your choice of the best laminate flooring will wear, you need to understand Abrasion Class (AC) ratings. This is a determination made by a neutral third party about the hardiness of a particular laminate. The higher the AC rating, the greater the durability and price. Laminates with AC ratings 1-3 are designed for the home. If you are putting in flooring in a very-low traffic area, you may be able to get away with an AC1. Otherwise, AC2 or AC3 may be better able to provide you the sturdiness for your daily life. Ratings AC4 and AC5 designate laminates appropriate for either average or heavy commercial use.

One of the many benefits to the best laminate flooring is that you can choose the surface that will better suit your environment. If you want a clean-looking wear layer that is easy to clean, consider a smooth surface. If you’re hoping for flooring that looks more like the original hardwood, stone or tile, selecting a textured surface will provide a feel that is close to the image below. Or if you are the type who wants your home to appear well-settled, choose the distressed look. Finally, for those who desire the greatest authenticity, embossed in registration provides a wear layer that perfectly matches the grain of the wood image.

Now that you’ve chosen your surface type, it’s time to discuss colors. Perhaps you’d like a warm oak, or a meek, unassuming maple. Bold, dark walnut, bright cherry, and enigmatic tigerwood are all available at a reasonable price. If you are looking for tile or stone laminate, colors range from the palest cream or grey to the blackest slate.

Finally, you must consider the various installation types. People love the best laminate flooring because it’s so easy to install themselves. But how easy do you need it to be? The most popular and well-known is the glueless click installation, where you need only fit one piece into a tongue-and-groove and snap it in. If you want the most solid and dependable installation, try glued laminate. This simply means that you will apply your own glue to the joints and allow it to dry. If you want the benefit of the glue without all the work, you should look for pre-glued joints. They already have the glue laid in the proper locations. All you need to do is moisten the glue and attach.

You know what you need to know to pick the best laminate flooring. All you have to do now is buy, install, and enjoy your new space.

Laying Down Laminate: How to Install Your New Floor

Laminate flooring comes in a wide variety of styles, is easy to clean, and it is very durable. Installing a laminate floor is also a relatively simple process, making it an ideal project if you are a DIY enthusiast looking to improve your home. If you want to know how to install laminate flooring, just follow these simple steps:

  • Step One – Allow your laminate flooring to acclimate to the temperature and humidity of the room in which it is being installed by laying out the packages of flooring in that room 48 hours prior to when you plan to install it.

  • Step Two – Remove any trim and base molding with a hammer and pry bar. Clean the sub-floor completely, careful to remove all dirt and debris. For the best end result, it’s vital to have a clean, flat surface with which to work.

  • Step Three – If you are installing your laminate floor over concrete, lay down a moisture barrier – usually a sheet of plastic six or eight millimeters thick – as directed by the manufacturer of the flooring. If you are installing on top of a wood floor, this liner is not required.

  • Step Four – Cut the doorjambs so that the flooring will fit under them. Use a piece of the flooring you plan to install to make a measurement, and make the cut with a trim saw. This is easier and less time-consuming than trying to cut the flooring to fit around the jambs.

  • Step Five – Now, you are ready to start installing. Some flooring brands will come with an under-layering that you need to lay down prior to installing, while others will have that layer already attached to the planks. Lay your first plank parallel to the longest wall in the room and with the groove facing the wall, then place half-inch spacers between the plank and the wall.

  • Step Six – This is where knowledge of how to install laminate flooring becomes vital. Trim the plank for the second row so that it ends six or eight inches before the previous row. Installing in this manner makes the floor stronger and also avoids too much uniformity in it’s appearance. When you have the piece trimmed, tap the tongue of the second plank into the the groove of the first plank using a discarded piece of flooring, or something else relatively soft, to protect the planks. Make sure that the pieces fit snugly together.

  • Step Seven – Continue to install planks in this manner, staggering the ends six or eight inches each time, and be sure to place half-inch spacers between planks and walls. This allows the floor to “breathe,” which will prevent warping and cracking. Don’t worry about the appearance of the gaps, as they’ll later be covered by the base molding.

  • Step Eight – The final plank will have to be measured and ripped prior to installation. Don’t forget to account for the spacer between the plank and the wall when you make your measurement. When the cut is made, install the plank and gather your base molding and door thresholds.

  • Step Nine – Remove your half-inch spacers from between the flooring and walls, then install the base molding and door thresholds.

Learning how to install laminate flooring really is as simple as that. The end result is well worth the effort. Just remember that, even more than usual, it’s important to be careful with your measurements and cuts, as replacing a mis-cut laminate flooring plank isn’t as simple as just grabbing another piece of lumber off the pile.

5 of Today’s Best Garbage Disposal Units

Garbage disposals are a convenient way to dispose of kitchen scraps and prevent the annoyance of clogged kitchen drains due to food scrap accumulation. There are many factors to consider when choosing the best garbage disposal for your home. First and foremost, what size of disposal will fit under your sink? If safety is an issue, consider a batch fed model over a continuous feed, which activates on insertion of a special stopper rather than with a wall switch.

These aren’t the only factors, however. In comparing specs to choose the best garbage disposal for your home, be sure to consider horsepower, quality of parts, noise level, and warranty as well. Some of the best reviewed disposal options available today include:

  1. Waste King Legend 8000 1 Horsepower Disposer
    The best garbage disposal for grinding beef bones and vegetables, such as stringy celery, without clogging. A removable splashguard makes this disposal easy to unblock in the event of an obstruction. According to owners, this disposal is quiet and easy to install, dropping in without screws or plumber’s putty on stainless steel sinks. This unit, with its stainless steel grinding components, also offers a lifetime warranty and in-home service and replacement. Be sure to measure for space before purchasing this disposal, as it is large, measuring 16.1 inches tall and 8.5 inches wide.
  2. KitchenAid Superba KCDS075T
    If you are looking for something quiet, this is the best garbage disposal for you. Among the quietest models tested, possibly in part to a slower grinding speed than some models, this disposal still grinds comparably when disposing of meat bones and vegetables. It is smaller than the Waste King Legend, 12.75 by 9 inches, and was also found by consumers to be easy to install. Warranty coverage is 5 years, and it doesn’t provide in-home service.
  3. Waste King Legend 2600 1/2 Horsepower Disposer
    This is the best garbage disposal for those that don’t often grind hard foods and are looking for a more inexpensive disposal. It is a good solution for cramped under sink spaces as well, though jamming is more of a concern due to the lower horsepower of this system. It offers similar features to the Waste King Legend 8000 for about half the cost. It also has stainless steel grinding components and a 5 year, in-home warranty.
  4. KitchenAid 1/2 Horsepower Continuous Feed Disposer KCDB250G
    The best garbage disposal for those working with tight spaces, this system measures 11.4 by 6.7 inches, is inexpensive, and gets good reviews from consumers. Grinding blades are galvanized steel rather than stainless, and the one year warranty doesn’t compare to the Waste King Legend 2600.
  5. InSinkErator Evolution Cover Control 3/4 Horsepower Disposer
    If safety, quiet operation, and longevity win out over pricing, this is the best garbage disposal for you. It grinds meat and bones as quickly as more powerful disposals with less noise. This disposal will not activate until a magnetic cover is placed on the drain, making it a great system for families with small children. This system also offers stainless steel components and a 7 year in-home warranty.

A Brief History of LED Light

a-brief-history-of-led-lightThe humble LED light, it doesn’t look like a revolutionary bent on world conquest. But that is exactly what these tiny multi-color lights have accomplished. From its  humble beginning, LED lighting has  changed our world in some remarkable ways.

Just a few years ago the LED light only lived inside electronic devices. Now light-emitting diodes are everywhere. You will find them in your car headlights, on holiday decorations and providing long lasting, cheap lighting in your home and office. Let’s explore the journey these little lights have taken to become an integral part of our lives and see what their future may be.

An Accidental Discovery

The LED came about as the result of one of those unexpected accidents in that up new and better ways to get things done. During early sixties researchers competition was fierce to develop solid state laser technology. Researchers Bob Biard and Gary Pittman began to try using semiconductors and p-n junctions as a means to control lasers. Discovering when they tested the device, they examined it with an infrared detector. Shining brightly, the LED made its very first, accidental, appearance in the fall of 1961.

A Better Way

In the beginning, Edison said “Let there be light.” Then some folks started to wonder if there might not be a better way. Electronics manufacturers had a problem with incandescent indicator lights; they just did not work very well. Fragile, dim and hot, the little bulbs just did not last long.

The year was 1962 and the man with a better way, GE engineer Nick Holonyak. He built the very first  light emitting diode that emitted visible light and inadvertently revolutionized the future of lighting. Those early LED lights only emitted infrared or colored light but the stage was set for bigger things. By the 1990s, LEDs could emit visible white light and saw use in a wide range of applications. Now technology for flat screen television and a host of hand-held devices employ LED technology.

Better and Cheaper

The earliest LED lights sold were expensive. Patented by Texas Instruments, they cost over a hundred dollars apiece. IBM bought the infrared LEDs to use in computer  punch card readers as a replacement for short lived tungsten incandescent bulbs. By the 1970s the cost of LED lights had dropped dramatically as manufacturers found more uses for the little lights.

By the 1990s, the cost of LED light fell to around ten cents per lumen from the ten dollars per lumen average in the late seventies. New innovations and applications for LED technology are bringing costs down and making LED light better and more efficient. Just as the LED revolutionized lighting and electronics, new technology promises to put display screens anywhere with organic LED light.

OLEDs or organic light-emitting diodes are extremely thin and can be shaped in different ways easily. Light weight, extremely thin and using minuscule amounts of energy, an OLED display can be as small as a cell phone display or as large as a wall for advertising or entertainment purposes.

LED technology has come a long way since its birth in the sixties. The future is brighter because LEDs are lighting the way.

Aluminum Roofing vs. Steel Roofing

aluminum-roofing-vs-steel-roofingAre you considering a new roof for your home? Is your current roof leaking because of poorly manufactured and/or installed shingles? Or is it just time for a new roof altogether? If so, you may want to consider asking your roofing contractor about switching to aluminum or steel as an alternative. They are sleek, attractive, and will last considerably longer than tile roofs. But, which one should you go with? There are pros and cons to both, some of which are:

• Aluminum is more resistant to corrosion
• Steel is more fire resistant
• Aluminum is slightly more expensive
• Noise associated with both are virtually non-existent
• You can “camouflage” both by offsetting cosmetic issues
• And both options are sure to last long beyond your life expectancy

There are advantages and disadvantages to both options, and as you can see, it can be a tough choice to make. You will want to make the best informed decision so that you are able to enjoy your new roof for many years to come. Knowing what to look for and what to avoid can help give you the satisfaction of knowing you made the right choice. So, let’s look at the two as separate entities.

Aluminum Roofing

Aluminum roofing offers superior resistance from corrosion as opposed to steel, meaning that coastal regions will benefit greatly by using this option. A few more things to note not listed above are:

• Aesthetically, aluminum does not age very well. It is a bare and natural metal. Painting your aluminum roof before it is installed is highly recommended to take away from that “raw” look.
• Aluminum is an easy material to install for roofers, as its roofing applications are formidable and easier to work with.
• Aluminum is significantly lighter than steel and its strength to weight ratio is higher than most “common” metals. Consider the fact that airliners use aluminum as the framework for their jets. That’s a pretty strong case for choosing aluminum roofing.

Steel Roofing

Steel is the more common material associated with roofing. As with its aluminum counterpart, there are varying factors that could weigh into your decision to choose it. Some of those attributes are:

• Steel roofs almost always come with a colored finish applied
• Newer steel roofs are very lightweight and also have good resistance to corrosion
• When looking at value alone, steel is the right choice for several applications
• Steel is not as susceptible to denting, as is aluminum. It is a softer metal and can absorb a little more punishment

Installing Your New Roof With Peace Of Mind

There are several determining factors that may sway you one way or the other when deciding on an aluminum or steel roof. Having access to your roof so you can walk on it, overhanging branches from trees that might fall in a storm, heavy snowfall expectations…these are things to factor in when purchasing your new roof. One will handle those stresses better than the other.

The Life Expectancy of Window Tint

the-life-expectancy-of-window-tintingWindow tint will inevitably break down over time in the same way your vehicle will do. Just as your vehicle will get a certain amount of mileage during its lifetime, so will your window tinting. Some determining factors that could play a role in how long your tint lasts might be:

• The amount of sunlight that your windows receive
• The quality and brand of window tint that you use
• The installation of your tinting (including the skill level of the person who installed it)

Under extreme and constant sunlight, as in the southern and southwestern states, a poorly dyed and installed tint can begin to show signs of deteriorating in as little as three months. More common and standard window films should be able to withstand conditions for about 5 years, while high end metallized or deposition window tint can have a life expectance of over 10 years if maintained properly.

When tinting is applied poorly, or if a lesser quality brand is used, your window tint can bubble up, causing ripples to appear on your windows. This can also be caused by scorching temperatures and coming in contact with direct sunlight over a prolonged period of time. Your window tint may even become discolored during this process, meaning that a lower quality dye was replaced with a more “cost-friendly” alternative for the installer.

In order to prevent your tint breaking down or wearing out within a short period of time, you will want to be prepared before you actually have your tint installed. Asking installers certain questions will give you a good idea if they are the best person for the job. You may want to ask:

• What brand of film that they use
• What type of dye is used in their film
• What kind of experience their installers have with window tinting
• If they can provide positive references
• If they have pictures of some of their most recent installations

Any professional installer should be able to answer these questions with confidence, giving you reassurance that they are the best ones for the job. Make sure they are only using brands that come with lifetime performance warranties, or if your budget doesn’t allow for the top tier brand, set yourself up to get one that will last at least 5 years if properly installed.

Professionally Installed Tint vs. Do-It-Yourself Installation

Choosing the right option for you can save you a lot of unwanted headaches and hassle when trying to repair or replace your window tint in case something goes wrong. If you go through a dealer, you are covering yourself if you install the tint poorly yourself. Choosing the right dealer makes all the difference in the world.

Make sure that the dealer who installed your window tint offers a warranty as well. This may be either a five year or lifetime warranty that will just serve as an added protection to you and your windows. The warranty should cover the overall performance of the tint and the coloring as well. Having a dealer install your tint may cost a little more, but you will be protected in the event that the tint begins to peel or discolor in a very short period of time.

Taking the do-it-yourself route is fine as long as you know what you are doing. This option, however, does not come with any warranties, and you could end up suffering for that if your tint isn’t installed properly. It is the much cheaper route, but can also be filled with more inconveniences.

Residential Window Tinting: Energy-Efficiency on a Budget!

You probably already know that window tinting is a custom option for many new cars. Did you also know that the windows of your home can be tinted for energy savings and glare reduction?

Residential Window Tinting

Thousands of homeowners around the country are moving towards what’s called residential window tinting. Putting a film on your windows can give you more privacy while lowering the amount of cash you spend every month on electricity and cooling.

By letting in less sunlight, you can also sidestep having to replace old furniture as too much light can cause furniture to age prematurely and lose its color. For a fraction of what it would cost to replace your old windows with new ones, you can have a special film installed on your pre-existing windows to enjoy the same convenience and energy efficiency.

Energy Efficiency 

Have you ever heard the expression “throwing money out the window”? In some ways that’s literally true. Approximately half of heating and cooling expenses slip out through outdated windows that are no longer energy efficient. Heat and cooling efforts leaking out the window constitute literally the number one liability energy-wise for most homeowners.

A window film or residential window tint can help you restore your old windows to meet new energy-efficiency standards. By reducing the solar heat seeping in through your windows you reap benefits – that’s money in the bank that you’re not spending on AC and electricity every month. The year-on-year savings can be thousands of dollars.

Reducing Hot Spots and UV Light

According to 3M, residential window film allows homeowners to reduce hot spots and even glare while reaping the benefits of lowered cooling costs in the summer and lower exposure to UV radiation year-round. Window film can also help protect your home from break-in attempts and damage caused by extreme weather.

A quality ceramic tint added to your window can reduce the sun’s infrared glare by eighty percent while reducing the amount of UV radiation that makes it into your living room by a whopping ninety-nine percent. This will keep your furniture and other furnishings looking fresh for years to come.

Technical Aspects of Window Tinting

The darkness of window tint is predicated on the percentage of visual light transmission. This percentage is calculated by looking at the amount of light that is allowed to pass through the window’s tint versus the amount of light that stays on the window’s surface.

A thirty percent window tint, for instance, allows thirty percent of the light reaching the window to pass through whereas the other seventy percent of the light is blocked by the residential window film. This means that the lower the visual light transmission percentage, the larger the amount of light that the tint is blocking from entering your living room.

This also means that a tinted window with a low visual light transmission percentage will typically appear darker and have more tint. So, at ten percent on the visual light transmission scale, ninety percent of the light reaching the window is blocked by the window tint.

Most older windows have a visual light transmission percentage of around thirty to forty percent. This percentage is seen as a good balance between glare reduction and the amount of heat let into the room, on one hand, and windows that still look presentable and allow in ambient light.

There are even some companies that offer DIY options for window tinting. The aim is to give homeowners the chance to affordable reduce glare and reap the benefits of energy efficiency without breaking the bank.

How to Install a Garbage Disposal

If your old garbage disposal is wearing down, then you’re going to have to go out and purchase a new one. However, don’t feel like you have to hire someone else to remove your old garbage disposal and install a garbage disposal for you. Installing the garbage disposal by yourself is not as difficult as it might sound.

Getting a New Garbage Disposal
The first thing you need to do is to find a replacement for your old garbage disposal. When looking for new garbage disposal units, consider who will be using it, whether the noise is going to be an issue and what type of plumbing your home has. If there are children in the household, you may want to consider purchasing a batch feed disposal. A batch feed disposal requires a stopper to be used prior to operation, which is safer than a continuous feed disposal that uses a switch that turns the disposal on until you switch it off. As far as motors go, it depends on how big your household is. Lower horsepower is more suitable for households that produce a small amount of waste. You can also purchase a disposal that is made especially for septic tanks if your plumbing connects to a septic tank.

Removing the Old Garbage Disposal
If your garbage disposal is attached to your dishwasher, the first thing you should do is to detach the dishwasher hose using a screwdriver. You’ll then want to use a wrench to remove the “P” trap waste line that runs from the disposal by unscrewing the slip-nut that connects the disposal to the trap. There might be some waste-water sitting in the bottom of the trap, so be sure to place a bucket underneath while doing this. Then insert the screwdriver into the mounting ring lung and turn until it is loose in order to remove the disposal. Once the disposal unit is out, remove the sink sleeve’s ring, the sink sleeve, the fiber gasket and finally the plumber’s putty. Clean the sleeve, sink opening and flange to prepare the sink for your new garbage disposal.

Installing the Garbage Disposal
Now it’s time to install the new garbage disposal. Most disposals come with appliance wires attached. If yours does not, then remove the cover plate underneath the garbage disposal and attach the wires using the manufacturer’s instructions. Once the wires are connected, reattach the plate. The next step is to apply plumbers putty underneath the drain flange underneath the sink. Take the flange and insert it into the drain hole, attaching it with the use of the backup ring, the fiber gasket and the mounting ring. Use a screwdriver to attach everything tightly. Any plumber’s putty that has squeezed out around the flange can be trimmed away with a knife. The new garbage disposal can now be placed into the mounting ring. Make sure to tighten it until it stays in place. Once the disposal is up, connect it to the P-trap. You’ll have to measure the discharge pipe and then cut it to size using a hacksaw. Attach it to the garbage disposal’s outlet. To make sure it’s properly connected, read your manufacturer’s instructions. Finally, attach your dishwasher discharge tube.

Once your garbage disposal is installed, you’ll want to check to make sure it works. Turn your power back on and run water into the sink. Make sure the garbage disposal works by turning it on. Check underneath the disposal to make sure there are no leaks – then run food through the disposal to make sure it’s properly ground and disposed of.

Garbage Disposal Repair

Following up from our last post on garbage disposal troubleshooting, you might realize it’s time for some garbage disposal repair instead of buying a new one. This can become costly if you always have to bring out a professional. Here are a few tips for keeping your garbage disposal healthy and some basic repairs you can do on your own. There is, however, one very important rule: when performing garbage disposal repair NEVER put your hand down the disposal (also called the hopper). Instead, use an object such as the other end of a wooden broom stick.

Garbage Disposal Basic Maintenance

  • Keep your disposal healthy by regularly grinding lemon peels and ice cubes.
  • Keep odors away by first turning off the unit and then adding two handfuls of baking soda and half a cup of vinegar to the hopper. It will foam, once foaming is done rinse it clean with regular water and turn it back on.

Garbage Disposal is Stuck

This is the most common problem and is fairly simple in terms of garbage disposal repair. If your disposal makes a humming sound when you flip the switch then you probably have a stuck flywheel.

  1. NEVER stick your hand down the hopper (just a reminder but it deserves repeating).
  2. Turn off the disposal by unplugging the unit or switching it off at the electric service panel.
  3. Using a wooden broom handle try to dislodge whatever is stuck, you’re successful when you can feel the flywheel turn freely.
  4. OR (instead of step 3) find the offset wrench that came with the disposal (if you don’t have it you can get one at a hardware store that cares your same make and model). Insert the wrench into the flywheel turning hole (located in the center of the bottom of the unit). Turn clock wise until the unit flywheel turns freely.
  5. Plug the unit back in or flip the electric switch back to on.
  6. Back at the disposal press the reset button.
  7. Run water while flipping the switch on and off in short bursts, this will wash away whatever was causing the flywheel to be stuck.

DIsposal Won’t Turn On
Unlike the disposal being stuck (where you will hear a humming noise) if your disposal is not turning on there will be no noise at all when you flip the switch. Again, we’ll mention the golden rule of garbage disposal repair, NEVER stick your hand in the hopper, even if the entire unit is off.

  1. Check to make sure the disposal is plugged in.
  2. Press the Reset button on the bottom of the garbage disposal unit then see if it’ll work.
  3. If not check the circuit breaker. If it’s not the circuit breaker or the reset button then either the switch or the garbage disposal is broken.
  4. If you’re able turn off the circuit breaker and replace the switch (you may need to hire someone for this).
  5. If that doesn’t work you’ll need to have your garbage disposal replaced.

Garbage Disposal is Leaking

If it’s leaking where it connects to the dishwasher simply tighten the clamp. If the hose between the dishwasher and disposal is leaking replace the hose. If the leak is at the drainpipe of the disposal make sure all bolts are tight enough. If it’s not the bolts you’ll need to remove them and replace the gasket, make sure the bolts are tight once the replacement is in.

In terms of garbage disposal repair it simply can’t be said enough that you should NEVER put your hand in the hopper. Even if the disposal is off, even if you’re sure it won’t turn on take the extra 10 seconds and use a broom handle. Your fingers will thank you!